The 3M™ Reusable Respirator Exhalation Valve Filter is designed to mount on the valve cover of 3M™ Half Facepiece Reusable Respirators 6000 Series. This filter is designed to help filter the exhaled breath of the respirator wearer and provides source control when worn with 3M™ Half Facepiece Reusable Respirators 6000 Series.The 3M Reusable Respirator Exhalation Valve Filter can be easily installed and removed from 3M Half Facepiece Reusable Respirators 6000 Series. Users can conduct a positive pressure seal check while installed. The hard case can be wiped with 3M Respirator Cleaning Wipes. Users should replacethe 3MReusable Respirator Exhalation Valve Filter if damaged, if the filter media becomes soiled, or if breathing becomes difficult. This filter is a NIOSH approved accessory only for use with 3M Half Facepiece Reusable Respirators 6000 Series, when used with 3M Particulate Filters 7093, 5N11/501/603 or 2091, and is not FDA cleared for use as a medical device for use in surgical applications.
5N11/501/603 or 2091
Allows users to conduct a positive pressure seal check while installed on facepiece
and disinfectants between uses
Can be safely wiped with water
cleaners
Designed to help filter the wearer’s exhaled breath
Designed to maintain the breathing comfort provided by an exhalation valve
Helps provide source control when worn with 3M™ Half Facepiece Reusable Respirators 6000 Series
NIOSH approved accessory for 3M™ Half Facepiece Reusable Respirators 6000 Series with 3M™ Particulate Filters 7093
The filter's filter media meets 99% Bacterial Filtration Efficiency (BFE) based on testing conducted per ASTM F2101. Not FDA cleared as a medical device.
This filter is fluid resistant based on testing conducted per ASTM F1862.
